Wood Chipper "Crusher - 700" from PTO

Description Wood Chipper "Crusher - 700" from PTO

The Crusher-700 is used for crushing twigs, battens, knots, and other wood chips into commercial-sized chips ranging from 5–45 mm, which can be used for further pellet production. The grinder has a loading entrance that is 210 mm wideand 160 mm high. The performance of the grinder is up to 8 m³/h, but its actual performance depends on the quality of the raw material preparation and the number of personnel involved in the work.

This model is equipped with a hydraulic shaft tightening system, which greatly facilitates the processing of wood of different diameters and lengths. It should be noted that our wood chipper is equipped with two feed rollers, hydraulically driven by an internal pump, which can be stopped and reversed. In addition, the wood chipper has a speed controller for the pinch rollers, an oil filter, and a pressure gauge that indicates the need to replace the filter.

The Crusher-700 can also change the direction of the flow of chips by 360 degrees. At the customer's request, an unloading hopper increased to 2.5 m can be manufactured. 9XC tool steel is used for the knives of the chipping machine. The Crusher-700 is driven by a 22 kW/3000 rpm electric motor. It is also possible to manufacture this crusher from PTO (from 50 hp); the hydraulic drive for PTO versions is integrated into the hydraulic system of the tractor. One of the main advantages of our shredder, compared to many competitors, is the belt drive, which provides two main advantages.